How to Inflate a Flat Tubeless Tire on an Electric Vehicle  

1. **Use Motor Inertia**: Prop up the electric vehicle with its main stand. Turn on the ignition key, twist the throttle to the maximum to make the motor run at high speed. Once the speed builds up, squeeze the brake suddenly. Repeat this process several times. Now try inflating the tire again—this may make it easier to inflate.  

2. **Seal the Gaps**: Take a few plastic bags and seal all the gaps between the tire edge and the wheel hub to prevent air from leaking out of these gaps during inflation. Then use an air pump to inflate the tire; it will inflate quickly. After the tire is inflated, remove the plastic bags and add a little more air to top it up.  

3. **Elevate the Tire and Tap It**: Prop up the vehicle so that the front tire is suspended. Once suspended, use a hammer or a board to tap the tire, reducing the gap between the tire and the wheel rim. Then proceed to inflate the tire.  

4. **Remove the Valve Core**: If none of the above methods work, the gap between the tire and the wheel hub may be too large, or there may be other issues. In this case, you can remove the valve core, then use an air pump to inflate the tire— the tire will slowly inflate. After it inflates, stop, reinstall the valve core, and then add more air to the tire to reach the proper pressure.  

5. **Use Lubricant**: You can spray a small amount of lubricant on both sides of the tire. Then try inflating it again; this may make inflation easier.   It should be noted that if a tubeless tire is flat for a long time, it may cause the tire and wheel hub to stick together or result in other damages. Before inflating, it is best to check the condition of the tire and wheel hub first to ensure safety.